# 192.168.1.1 - My router
# 192.168.1.5 - WDMC IP from router's DHCP
# 00:00:00:AA:BB:CC - Lan MAC address (hidden)

# MTD partitions from kernel boot log:
0x000000000000-0x000000500000 : "u-Boot"
0x000000500000-0x000000a00000 : "uImage"
0x000000a00000-0x000000f00000 : "ramdisk"
0x000000f00000-0x00000d800000 : "image.cfs"
0x00000dd00000-0x00000ec00000 : "rescue firmware"
0x00000ec00000-0x000010000000 : "config"
0x00000d800000-0x00000dd00000 : "reserve"


Marvell>> bdinfo
arch_number = 0x00000BDE
boot_params = 0x00000100
DRAM bank   = 0x00000000
-> start    = 0x00000000
-> size     = 0x20000000
DRAM bank   = 0x00000001
-> start    = 0x00000000
-> size     = 0x00000000
DRAM bank   = 0x00000002
-> start    = 0x00000000
-> size     = 0x00000000
DRAM bank   = 0x00000003
-> start    = 0x00000000
-> size     = 0x00000000
ethaddr     = 00:50:43:02:02:00
ip_addr     = 2.66.66.200
baudrate    = 115200 bps
TLB addr    = 0x1FFF0000
relocaddr   = 0x1FEF5000
reloc off   = 0x1FEF5000
irq_sp      = 0x1F9F4F08
sp start    = 0x1F9F4EF8
FB base     = 0x00000000

Marvell>> env print
CASset=min
MALLOC_len=5
autoload=no
baudrate=115200
bootargs=root=/dev/ram console=ttyS0,115200 max_loop=32
bootargs_end=:10.4.50.254:255.255.255.0:KW40:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=nand read.e 0xa00000 0x500000 0x500000;nand read.e 0xf00000 0xa00000 0x500000;bootm 0xa00000 0xf00000
bootdelay=1
cacheShare=no
console=console=ttyS0,115200
disL2Cache=yes
disaMvPnp=no
dnsip=192.168.1.1
eeeEnable=no
enaAutoRecovery=yes
enaClockGating=no
enaFPU=no
enaWrAllo=no
eth1addr=00:50:43:02:00:00
eth1mtu=1500
ethact=egiga1
ethaddr=00:50:43:02:02:00
ethmtu=1500
ethprime=egiga0
gatewayip=192.168.1.1
image_name=uImage
initrd_name=uInitrd
ipaddr=192.168.1.5
loadaddr=0x02000000
loads_echo=0
mtdids=nand0=armada-nand
mtdparts=mtdparts=armada-nand:4m(boot),-(rootfs)
mvNetConfig=mv_net_config=1,(00:50:43:11:11:11,0:1:2:3:4),mtu=1500
mv_pon_addr=00:50:43:00:00:02
nandEcc=1bit
netbsd_en=no
netmask=255.255.255.0
netretry=no
pcieTune=no
pexMode=rc
pxe_files_load=:default.arm-armada370-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
rcvrip=169.254.100.100
rootpath=/srv/oneiric
sata_delay_reset=0
sata_dma_mode=yes
serverip=192.168.1.1
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
usb0Mode=host
usb1Mode=host
usb2Mode=device
usbActive=1
vxworks_en=no
yuk_ethaddr=00:00:00:AA:BB:CC

Environment size: 1562/524284 bytes

Marvell>> dhcp
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 192.168.1.5

Marvell>> tftp
*** Warning: no boot file name; using 'C0A8013D.img'
Using egiga1 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.5
Filename 'C0A8013D.img'.
Load address: 0x2000000
Loading: *
TFTP error: 'file /tmp/C0A8013D.img not found' (1)
Not retrying...

Marvell>> mtdparts

device nand0 <armada-nand>, # parts = 2
 #: name                size            offset          mask_flags
 0: boot                0x000000400000          0x000000000000          0
 1: rootfs              0x00000fc00000          0x000000400000          0

active partition: nand0,0 - (boot) 0x000000400000 @ 0x000000000000

defaults:
mtdids  : none
mtdparts: none